A Fall Arrest system is put in place to provide an operative with the maximum amount of freedom and movement when working at height, but in doing this it also allows the worker to reach, for example the edge of a rooftop where a fall is possible.
The fall arrest system is designed to be permanently attached to stainless steel brackets where maintenance workers are exposed to a risk of falling when performing their work. The worker is continuously attached to the fall arrest system with a glider that can travel along the cable and pass through the neo brackets.
These Systems are put into place as a measure to reduce the impact of a persons fall if this occurs, preventing them from a life threatening accident at a lower level or the ground. The fall arrest system will also allow the person to effect a self rescue or be rescued.