Bearing in mind that Malt Group POWERED CRADLE has been installed in 19 different countries around the world, it is established that it is tested product which can pass through any stringent test or scrutinizing agencies.
It forms the integral part of the BMU system inside which the technician is taken and maneuvered with the assistance of roof attachment to go up and down of the façade.
Powered Cradles can be supplied in 1, 2 and 3 meters length and can be combined together to a single unit of maximum 12 meters length.
The electrically driven equipment is entirely composed of aluminum, there will be 2 Nos. of electrical hoists installed inside the cradle, one at each end and incorporates a guiding system that ensures the correct reeling of the wire rope, the operators use a centralized control system witheasy operated soft push button, the Cradle is complete with non-slip floor and suitable wall rollers to prevent damage to the building face, the safe working load is 240 Kg, Cradle finish will be aluminum Mill finish.
The cradle will be equipped with safety block on which the safety ropes pass, In the event of a breakdown or power failure, the winches can be manually operated. Also it includes emergency stop, electromagnetic brake in the hoist with secondary mechanical brake, Upper limit safety device, Lower limit safety device, Thermal overload safety for cradle, Slack wire ropes safety device, plus all necessary safety limit switches.
- 380/415v, 50/60 hertz, 16Amp, 3 phase (water proof)
- Total power consumption - 5kW